The difference between turning and milling cutters
Time：
2022-09-06 11:25
The turning tool generally uses a blade without a rear corner. When used, the blade is inclined at a certain angle with respect to the bottom surface of the turning tool. so that the turning tool has a necessary relief angle. The basic requirements for the blade clamping mechanism are: convenient operation of the indexing, high positioning accuracy, reliable clamping, and does not prevent chip evacuation and good processability.
The blades of the milling cutter are basically only clamped by wedges and clamped by platens， In order to make the surface of the machined workpiece smooth. the axial position of all inserts on the milling cutter must be exactly the same, and the face milling cutter for finishing is used. The blade in one or two specific positions can be replaced with a long straight edged wiper blade to scrape the remaining small marks after the remaining blades are cut
Webpage Copyright © Eastern (Kunshan) Carbide Tools Co.,LTD.
Copyright © 2018 All Rights Reserved.
Contact：Zhang Jianxin：13506266139
Hu Yong：13621559328
<Central and East China>
Liang Guofang：13823077099
<South China>
Email：zhangjianxin@ks-eastern.com
huyong@ks-eastern.com
<Central and East China>
gf.liang@ks-eastern.com <South China>
Name：Eastern (Kunshan) Carbide Tools Co.,LTDAddress: Building 32, China Energy Conservation (Circular) Economy Industrial Park, No. 2980, Huanqing Road, Kunshan, Jiangsu, China
TEL：0512-57396480
FAX：0512-57396481